thomaweather

I am about to embark on the journey to getting my 70 van alive again. Engine is rebuilt, with headers and 2 barrel carb, and the easy part is getting the engine all together again. What I need to know is regarding the shifter linkage.

 

Where the stick shift comes down to the 90 degree angle, there is a guide pin on the frame that holds it in place through a guide sleeve in the linkage. Mine is missing, and would like to weld on a new one, but don't know the dimensions... any advice?

Quote 0 0
Wayne
Could you use a bolt to determine the size and length? IE, try a 6mm x 20mm and so on....
Quote 0 0